Weider Pro 9020 English Manual - Page 20

Locate Cable C 65.

Get Weider Pro 9020 PDF manuals and user guides View all Weider Pro 9020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

27. Apply grease to an M10 x 107mm Bolt Set (104). 27 Attach the Leg Lever (20) to the Left Seat Frame (18) with the M10 x 107mm Bolt Set (104). 104 18 Grease 104 20 28. See the CABLE DIAGRAMS starting on page 40 to identify the cables. 28 Locate Cable C (65). Route Cable C through the Lat Bar Bracket (15). Make sure that Cable C is under the indicated rod. Insert a Pulley (46) into the Lat Bar Bracket (15) under Cable C (65). Attach the Pulley (46) with an M10 x 75mm Bolt (113), two M10 Washers (93), two 16mm Spacers (100), and an M10 Locknut (84). 15 Rod 100 93 84 46 65 100 93 113 29. Route Cable C (65) under a Pulley (46). 29 Attach the Pulley (46) and a Cable Trap (49) to the Left Upright (14) with an M10 x 45mm Bolt (95) and an M10 Locknut (84). Make sure that the Cable Trap is oriented as shown. 14 84 49 46 65 95 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
20
27. Apply grease to an M10 x 107mm Bolt Set (104).
Attach the Leg Lever (20) to the Left Seat Frame
(18) with the M10 x 107mm Bolt Set (104).
28.
See the CABLE DIAGRAMS starting on page
40 to identify the cables.
Locate Cable C (65).
Route Cable C through
the Lat Bar Bracket (15).
Make sure that Cable
C is under the indicated rod.
Insert a Pulley (46) into the Lat Bar Bracket (15)
under Cable C (65).
Attach the Pulley (46) with an M10 x 75mm
Bolt (113), two M10 Washers (93), two 16mm
Spacers (100), and an M10 Locknut (84).
28
27
29. Route Cable C (65) under a Pulley (46).
Attach the Pulley (46) and a Cable Trap (49) to
the Left Upright (14) with an M10 x 45mm Bolt
(95) and an M10 Locknut (84).
Make sure that
the Cable Trap is oriented as shown.
29
104
Grease
104
20
84
93
93
100
100
Rod
15
113
84
14
95
49
46
46
65
18
65