Weider Pro 9020 English Manual - Page 29

Insert a Pulley 46 into the Left Seat Frame 18

Get Weider Pro 9020 PDF manuals and user guides View all Weider Pro 9020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

50. Locate Cable A (63). Route Cable A through the Leg Lever (20) and the Left Seat Frame (18). 50 Insert a Pulley (46) into the Leg Lever (20) over Cable A (63). Attach the Pulley (46) with an M10 x 45mm Bolt (95) and an M10 Locknut (84). 20 18 84 46 63 95 51. Insert a Pulley (46) into the Left Seat Frame (18) over Cable A (63). 51 Attach the Pulley (46) with an M10 x 115mm Bolt (97), two M10 Washers (93), two 38mm Spacers (105), and an M10 Locknut (84). 63 18 93 105 97 84 93 105 46 52. Route Cable A (63) through the Left Upright (14) and the bracket on the Short Base (17). 52 Attach a Pulley (46) and two Half Guards (47) to the bracket on the Short Base (17) with an M10 x 45mm Bolt (95) and an M10 Locknut (84). Make sure that the Half Guards are oriented as shown. 46 84 95 47 47 14 63 17 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
29
50.
Locate Cable A (63).
Route Cable A through the
Leg Lever (20) and the Left Seat Frame (18).
Insert a Pulley (46) into the Leg Lever (20) over
Cable A (63).
Attach the Pulley (46) with an M10 x 45mm Bolt
(95) and an M10 Locknut (84).
51. Insert a Pulley (46) into the Left Seat Frame (18)
over Cable A (63).
Attach the Pulley (46) with an M10 x 115mm Bolt
(97), two M10 Washers (93), two 38mm Spacers
(105), and an M10 Locknut (84).
50
51
52
46
84
63
63
63
95
20
18
84
93
46
105
105
93
97
84
47
14
47
17
95
18
46
52. Route Cable A (63) through the Left Upright (14)
and the bracket on the Short Base (17).
Attach a Pulley (46) and two Half Guards (47)
to the bracket on the Short Base (17) with an
M10 x 45mm Bolt (95) and an M10 Locknut (84).
Make sure that the Half Guards are oriented
as shown.