Weider Pro 9020 English Manual - Page 31

Attach Cable A 63 with an M10 x 68mm Bolt

Get Weider Pro 9020 PDF manuals and user guides View all Weider Pro 9020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

55. Route Cable A (63) over a Pulley (46). 55 Attach the Pulley (46), a Cable Trap (49), and two Half Guards (47) to the third set of holes in two Pulley Plates (26) with an M10 x 50mm Bolt (102) and an M10 Locknut (84). Make sure that the Cable Trap and the Half Guards are oriented as shown. 84 47 49 46 26 47 102 63 56. Insert the end of Cable A (63) into the hole in the Long Base (1). 56 Attach Cable A (63) with an M10 x 68mm Bolt (98), two M10 Washers (93), two 24mm Spacers (87), and an M10 Locknut (84). 84 63 93 1 87 87 93 98 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
31
55
56. Insert the end of Cable A (63) into the hole in the
Long Base (1).
Attach Cable A (63) with an M10 x 68mm Bolt
(98), two M10 Washers (93), two 24mm Spacers
(87), and an M10 Locknut (84).
56
47
49
47
26
102
63
98
93
93
84
87
87
1
63
55. Route Cable A (63) over a Pulley (46).
Attach the Pulley (46), a Cable Trap (49), and
two Half Guards (47) to the third set of holes
in two Pulley Plates (26) with an M10 x 50mm
Bolt (102) and an M10 Locknut (84).
Make sure
that the Cable Trap and the Half Guards are
oriented as shown.
84
46