Weider Pro 9020 English Manual - Page 30

Attach the Pulley 46 and two Half Guards 47

Get Weider Pro 9020 PDF manuals and user guides View all Weider Pro 9020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

53. Route Cable A (63) over a Pulley (46). 53 Attach the Pulley (46), a Cable Trap (49), and two Half Guards (47) to the third set of holes in two Pulley Plates (26) with an M10 x 50mm Bolt (102) and an M10 Locknut (84). Make sure that the Cable Trap and the Half Guards are oriented as shown. 26 47 102 84 47 49 46 63 54. Note: For clarity, the weight stack is not shown in the drawing. 54 Route Cable A (63) under a Pulley (46). Attach the Pulley (46) and two Half Guards (47) to the bracket on the Short Base (17) with an M10 x 45mm Bolt (95) and an M10 Locknut (84). Make sure that the Half Guards are oriented as shown. 63 46 17 84 47 95 47 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
30
53
54. Note: For clarity, the weight stack is not shown in
the drawing.
Route Cable A (63) under a Pulley (46).
Attach the Pulley (46) and two Half Guards (47)
to the bracket on the Short Base (17) with an
M10 x 45mm Bolt (95) and an M10 Locknut (84).
Make sure that the Half Guards are oriented
as shown.
54
63
26
47
47
102
84
84
46
47
17
95
53. Route Cable A (63) over a Pulley (46).
Attach the Pulley (46), a Cable Trap (49), and
two Half Guards (47) to the third set of holes
in two Pulley Plates (26) with an M10 x 50mm
Bolt (102) and an M10 Locknut (84).
Make sure
that the Cable Trap and the Half Guards are
oriented as shown.
63
46
49
47