Xerox Z750/N Troubleshooting Guide - Page 44
Adjusting margins, Adjusting margins for a single-sided print
![]() |
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Advanced Printing Features for Phaser 750 Printers Adjusting margins This printer provides a front-panel interface to adjust the page margins: s Single-sided print s Automatically prints when the printer has one tray only. s Duplex (Double-sided print) s Requires the Automatic Duplex/Lower Tray Assembly. s Duplex Unit must be installed in the upper tray slot. s In the front panel's Printer Defaults menu, Duplex mode must be enabled. Adjusting margins for a single-sided print You might want to adjust the margins on a single-sided page if the image area is not centered on the page. In other words, the margins are not even, relative to the outside edge of the paper. 0236-63 1. In the front panel's Printer Settings menu, set the Duplex mode to Disable. 2. Print the Margin Adjust page from the front panel. a. Press Help. b. Scroll to Print Quality; and press Menu. c. Scroll to Calibrate Margins, press Menu, the display reads: Calibration Page Print d. Press Print. 3. Determine if the margins need adjustment: use the page's top- and left-margin gauges to note how much the margins are off-center. Advanced Features and Troubleshooting Manual 35
![](/manual_guide/products/xerox-z750n-troubleshooting-guide-7f095c9/44.png)