Xerox Z750/N Troubleshooting Guide - Page 80
Advanced Features and Troubleshooting Manual, Troubleshooting Phaser 750 Printers, Go to a specific document number, Items to, Check for Slow Printing Issues.
![]() |
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Troubleshooting Phaser 750 Printers Driver Settings Changing the data format used by the driver affects print speed in different operating systems: s Macintosh: the driver defaults to binary data. This is recommended. s Windows 95/Windows 98: Under the Set Up tab, click Expert Options, then click PostScript. Check Printer Properties. Put a check in the Use Automatic Data Format box. This selects the correct data format for the connection method. s Windows NT 4.x: In Printer Properties, click the Device Settings tab. Locate the Output Protocol and type Binary for network connections. If connected via parallel, change from ASCII to BCP. s Windows 2000: Under the Tektronix Features tab, which is available from the File Print Dialog or Print Manager Printer Properties, check Printer Properties. If printing is slow, refer to the TekSMART knowledge base for solutions: www2.tek.com/TekSMART/ 1. In the Go to a specific document number field, enter the number 37185 and click Go. 2. A solution for Slow Printing, Print Time Too Long is resolved in the article, Items to Check for Slow Printing Issues. Advanced Features and Troubleshooting Manual 71
![](/manual_guide/products/xerox-z750n-troubleshooting-guide-7f095c9/80.png)