Xerox Z750/N Troubleshooting Guide - Page 94
Enabling and disabling SysStart Job execution, Macintosh users
![]() |
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Troubleshooting Phaser 750 Printers Enabling and disabling SysStart Job execution You may load a startup (Sys/Start) file onto an optional internal IDE hard disk. The Sys/Start job file is similar to an init file: When you turn on the printer, the file executes - providing that Sys/Start has been enabled through a control file downloaded to the printer. You can also control SysStart Job execution from the printer's front panel Printer Defaults menu, using the Startup Mode option. 1. Press Menu; and scroll to Configuration. Configuration Menu 2. Press Menu; and scroll to Startup Mode. Scroll to On and press OK; the printer displays the following: Startup Mode On OK 3. Press until Ready appears. Macintosh users 1. From the printer's CD-ROM, run the Installer application. Select Custom Install. Select Printer Utilities. From your computer's hard disk, open the PhaserTools folder. 2. From the PhaserTools folder, double-click Apple Printer Utility. s Under AppleTalk Zones, select your printer's zone. s Under Printers, select your printer. s Click Open Printer. 3. From the Utilities menu, select Send PostScript File. 4. From the PhaserTools folder, open the Printer Utilities folder; select SysStartJob; click Add. 5. Click Send. Advanced Features and Troubleshooting Manual 85
![](/manual_guide/products/xerox-z750n-troubleshooting-guide-7f095c9/94.png)