Xerox Z750/N Troubleshooting Guide - Page 48
Calibrate Colors, Menu., Print.
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Adjusting Color Density 5. After changing the density setting for any or all colors, reprint the Color Reference Page: s The dashed line reflects the new settings. s In this example, the density for each color is set to a different value. Color Reference Page Cyan -4 Magenta Yellow -6 Black -2 -4 -9 0 -9 -2 -7 +2 -7 0 -5 +4 -5 +2 -3 +6 -3 +4 -1 +8 -1 +6 +1 +10 +1 +8 +3 +3 +10 +5 +5 +7 +7 +9 9698-18.color This table shows the selections available in the Calibrate Colors menu. Calibrate Colors menu selections Menu item* What it does How it works Adjust light/dark Menu Lightens or darkens all toner colors. For best results adjust each color individually in the Adjust each color menu. s Press Menu. Lighter/Darker:+0 OK Lightens or darkens all toner colors. The current Light/Dark setting reflects the average value of the four separate density settings. Each increase adjusts all four density values up or down the same amount. The available adjustment range is limited so that no single color exceeds the ±10 value limit. s To lighten colors, press (the number increases in 1-point steps); then press OK. Adjust each color Menu Controls the color density for each color independently. s Press Menu. Color Reference Page Prints a sample of the current density s Press Print Print settings and a range of settings for each color. Advanced Features and Troubleshooting Manual 39