Xerox Z750/N Troubleshooting Guide - Page 67
Printer User Guide. For best results use Tektronix media., Piece of image is missing
![]() |
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Troubleshooting Phaser 750 Printers A smear in the image repeats at the same location on the page s Replace the Imaging Unit. One or more vertical, dark and even fine lines appear on the print through all colors s Replace the Imaging Unit; make sure that the old Imaging Unit is not exposed to light for more than 3 minutes. s If a new Imaging Unit does not correct the problem: s Put the old Imaging Unit back into the printer. s Repack the new Imaging Unit. s Replace the Fuser. Piece of image is missing s A piece of the printed image is missing and reappears out of place, approximately 129 mm (5 in.) down the page. s Verify correct media settings at the Multi-Purpose Tray. Refer to the Phaser 750 Printer User Guide. For best results use Tektronix media. s Print 20 pages of blank pages to clean the roller. s If you still see the problem: Replace the Fuser Roll. s If you still see the problem: Replace the Fuser. 58 Phaser 750 Color Printer
![](/manual_guide/products/xerox-z750n-troubleshooting-guide-7f095c9/67.png)