Xerox Z750/N Troubleshooting Guide - Page 90

Error, User Corrective Action, Remove and re-install the Fuser. Turn the printer off, then on.

Get Xerox Z750/N - Phaser Color Laser Printer PDF manuals and user guides
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 90 highlights

Troubleshooting Phaser 750 Printers Error Error 52 Error 53 Error 60 Error 61 Error 62 Error 63 Error 70, 71, and 72 Error 73 Error 74 Error 80, 81, 82, 83, and 84 Error 01p through Error 47p User Corrective Action s Remove the Duplex Unit (if installed). s Check for paper under the Upper Tray. s Turn power off, then on. s Open left door and remove any jammed media. s Tun the printer off, then on. s Remove the media from the Multi-Purpose Tray. Turn the printer off, then on. s Reinstall the media. Make sure you do not overfill the tray. s Remove and re-install each Toner Cartridge. Turn the printer off, then on. s Replace each Toner Cartridge. Turn the printer off, then on. s Check for jammed paper throughout the paper path (especially in the paper feeder and Fuser). s Remove and re-install the Fuser. Turn the printer off, then on. s Slide out and re-insert the paper feeder. Turn the printer off, then on. s Replace the Fuser. Turn the printer off, then on. s Remove and re-install the Imaging Unit. Turn the printer off, then on. s Replace the Imaging Unit. Turn the printer off, then on. s Turn the printer off, then on. s Remove and re-install the Imaging Unit. Turn the printer off, then on. s Replace the Imaging Unit. Turn the printer off, then on. s Remove and re-install the Fuser. Turn the printer off, then on. s Replace the Fuser. Turn the printer off, then on. s Make sure that all four toner cartridges are installed in the printer. s Turn the printer off, then on. s Make sure that installed memory DIMM(s) are compatible with printer's image processor board and that they are installed in the proper slot(s). Advanced Features and Troubleshooting Manual 81

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Advanced Features and Troubleshooting Manual
81
Troubleshooting Phaser 750 Printers
Error 52
■
Remove the Duplex Unit (if installed).
■
Check for paper under the Upper Tray.
■
Turn power off, then on.
Error 53
■
Open left door and remove any jammed media.
■
Tun the printer off, then on.
Error 60
■
Remove the media from the Multi-Purpose Tray. Turn the printer off, then on.
■
Reinstall the media. Make sure you do not overfill the tray.
Error 61
■
Remove and re-install each Toner Cartridge. Turn the printer off, then on.
■
Replace each Toner Cartridge. Turn the printer off, then on.
Error 62
■
Check for jammed paper throughout the paper path (especially in the paper
feeder and Fuser).
■
Remove and re-install the Fuser. Turn the printer off, then on.
■
Slide out and re-insert the paper feeder. Turn the printer off, then on.
■
Replace the Fuser. Turn the printer off, then on.
Error 63
■
Remove and re-install the Imaging Unit. Turn the printer off, then on.
■
Replace the Imaging Unit. Turn the printer off, then on.
Error 70
,
71
,
and
72
■
Turn the printer off, then on.
Error 73
■
Remove and re-install the Imaging Unit. Turn the printer off, then on.
■
Replace the Imaging Unit. Turn the printer off, then on.
Error 74
■
Remove and re-install the Fuser. Turn the printer off, then on.
■
Replace the Fuser. Turn the printer off, then on.
Error 80
,
81
,
82
,
83
, and
84
■
Make sure that all four toner cartridges are installed in the printer.
■
Turn the printer off, then on.
Error 01p
through
Error 47p
■
Make sure that installed memory DIMM(s) are compatible with printer’s image
processor board and that they are installed in the proper slot(s).
Error
User Corrective Action