Xerox Z750/N Troubleshooting Guide - Page 92
Enabling and disabling the Intelligent Ready feature, To increase the timeout value, Configuration
![]() |
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Troubleshooting Phaser 750 Printers Enabling and disabling the Intelligent Ready feature s When the printer is idle for the time set in the Energy Star front panel menu, the printer cools down completely. When the printer exits the Energy Star mode, it is ready to print in about 90 seconds. s The Energy Star default is set to 30 minutes. After 30 minutes of inactivity, the printer begins a cool-down cycle that requires a 90-second warm-up period before being ready to use again. s Increasing the Energy Star value from 30 minutes keeps the printer ready for printing and eliminates the warm-up period. For typical office environments, set the value to 4 hours. s For optimum printing performance and best toner economy, leave the printer turned on overnight and during weekends. To increase the timeout value: 1. Press Menu on the front panel; the following message appears: Menu Maps Menu 2. Scroll to the Configuration and press Menu; the printer displays the following message: Configuration Menu 3. Scroll to Energy Star Timeout and press Menu; the printer displays the following message: Timeout:30 minutes OK 4. Scroll until the desired setting is reached. For best performance, select 4 hours. Change the Energy Star Timeout from its default value (30 minutes) to a maximum value: Press
![](/manual_guide/products/xerox-z750n-troubleshooting-guide-7f095c9/92.png)