ZyXEL MWR102 User Guide - Page 18
Resetting the MWR102, Procedure to Use the Reset Button - default password
View all ZyXEL MWR102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Figure 3 Login Screen The following table describes the labels in this screen. LABEL DESCRIPTION User Name Password Type "admin" (default) as the User name. Type "1234" (default) as the password. 2.3 Resetting the MWR102 If you forget your password or IP address, or you cannot access the Web-Based Management Interface, you will need to use the RESET button at the back of the MWR102 to reload the factory-default configuration file. This means that you will lose all configurations that you had previously saved, the password will be reset to "1234" and the IP address will be reset to "192.168.100.1". 2.3.1 Procedure to Use the Reset Button 1 Make sure the power LED is on. 2 Press the RESET button for longer than one second to restart/reboot the MWR102. 3 Press the RESET button for longer than five seconds to set the MWR102 back to its factorydefault configurations. The Power LED will start to blink to indicate that the default configuration is being loaded. 18