Asus P5RD1-V Deluxe Motherboard Installation Guide - Page 148

S t r i p e S i z e - sets the stripe size. D e l e t e R A I D S e t t i n g s & P a r t i t i o n - deletes a selected RAID set and partition. D e l e t e A l l R A I D S e t t i n g s & P a r t i t i o n - deletes all current RAID set(s) and partition(s). R e b u i l d R A I D a r r a y - rebuilds mirror drive(s). On the upper right side of the screen is the legend box. The keys on the legend box allow you to navigate through the setup menu options. The following lists the keys in the legend box and their corresponding functions. S P A C E : Select an item ↑, ↓ : Enter : ESC Move cursor to the next item Confirms a selected item : Exit Creating a RAID 0 configuration To create a RAID 0 set: 1. From the ULI RAID BIOS Setup utility menu, move the cursor to C r e a t e R A I D 0 S t r i p i n g f o r P e r f o r m a n c e then press . 2. Use the up or down arrow keys to select a drive then press or . The striped mark "S" appears before a selected drive. 3. Repeat step 2 to select the second drive. 4. The utility prompts the following warning message: Data on RAID drives will be deleted (Y/N)? Press to continue or press to return to the menu. 5. Key in a RAID name with a maximum of eight (8) alphanumeric characters then press . Do not use special characters or symbols. 6. The utility displays the RAID Array settings at the bottom of the screen. 5-38 Chapter 5: Software support