Asus P5RD1-V Deluxe Motherboard Installation Guide - Page 57
P5RD1-V DELUXE Chassis intrusion connector, P5RD1-V DELUXE IEEE-1394 connector
View all Asus P5RD1-V Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
10. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. CHASSIS P5RD1-V ® (Default) P5RD1-V DELUXE Chassis intrusion connector 11. IEEE 1394a connector (10-1 pin IE1394_1) This connector is for the IEEE 1394a module. Connect the the IEEE 1394a module cable to this connector, then install the module to a slot opening at the back of the system chassis. +5VSB_MB Chassis Signal GND TPA1GND TPB1+12V GND TPA1+ GND TPB1+ +12V P5RD1-V ® IE1394_1 1 P5RD1-V DELUXE IEEE-1394 connector Never connect a U S B c a b l e to the USB connectors. Doing so will damage the motherboard! ASUS P5RD1-V Deluxe 2-33