Bosch WTMC5321US Installation and Use & Care (all languages) - Page 19
Cleaning, bearing, shield, Change, light - replacement parts
UPC - 825225852339
View all Bosch WTMC5321US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
This deposit can easily be removed by wiping the sensors (the two bars next to the lint filter) with a cloth and a little white vinegar. Use white vinegar only! Clean the moisture sensor once a month. Cleaning the bearing shield Over time, fluff from the drying process collects in the bearing shield. This fluff can be easily removed using your vacuum cleaner, at least once a month. Change the light bulb The dryer light turns on inside the drum when you open the door. To change the light bulb: q Set program selector to Off". q Turn off the circuit breaker. q Pull out power supply plug. q Open the door and locate the light bulb on the upper left side of the seal. q Loosen the screw of the cover and open the cover. q Turn bulb counterclockwise. Replace the bulb with a new appliance bulb only (obtainable through parts department). q Replace the cover and secure with the screw. q Plug in dryer or reconnect power supply. 19