Brother International BAS-375E Programmer Instruction Manual - English - Page 127
Ending program, Resizing input, Programming, Inputting the end code, Saving, magnification of 5.
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Chapter 3 Programming with Command Function Ending program 1. Press P . Resizing input Resizing input is used to program a detailed pattern stitch by stitch. The example in the left is used for explanation of programming the pattern to the magnification of 5. Programming 1. Press P . The work clamp moves to the home position and the programmer screen is displayed. 2. Press 9 0 5 M . 9 is the command for resizing input. Input the magnification (02, 05, 10) in . 3. Move the work clamp with . Press L when the needle point is at point A of the pattern. The first stitch (point A) is programmed. 4. Repeat step 3 and create the program to point D. Inputting the end code 1. Press L at the last stitch and press . 1 1 1 E The work clamp returns to the start position. Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. 126 Programmer