Brother International BAS-375E Programmer Instruction Manual - English - Page 184
Copying a pattern rotated clockwise counterclockwise
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Chapter 3 Programming with Command Function Copying a pattern rotated clockwise (counterclockwise) Command to be used 6 7 6M 6 7 7M Copying a pattern rotated clockwise Copying a pattern rotated counterclockwise This function is available only when the needle is at the home position. Values of 1 - 359 degrees are available for input. The copied data is linked to the original data with a split data. 1. Make sure that the needle is at the home position. Press R if the needle is not at the home position. 2. Determine the center point for rotation with . 3. Input 6 7 6 M or 6 7 7 M . 4. Input the angle in 3 digits and press L . Programmer 183
Programmer
183
Chapter 3 Programming with Command Function
Copying a pattern rotated clockwise (counterclockwise)
Command to be used
M
6
7
6
Copying a pattern rotated clockwise
M
6
7
7
Copying a pattern rotated counterclockwise
This function is available only when the needle is at the home position.
Values of 1 - 359 degrees are available for input.
The copied data is linked to the original data with a split data.
1.
Make sure that the needle is at the home position.
Press
R
if the needle is not at the home position.
2.
Determine the center point for rotation with
.
3.
Input
M
6
7
6
or
M
6
7
7
.
4.
Input the angle in 3 digits and press
L
.