Brother International BAS-375E Programmer Instruction Manual - English - Page 36
Program points C, D and E.
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
7. Move the work clamp with . Press twice when the needle point is at point B of the pattern. 8. Program points C, D and E. 9. When point E is programmed, press again. 10. Program point F. 11. When point F is programmed, press again. 12. Press . The needle moves to points F, G and H. Chapter 2 Programming with Help Function 13. When the needle stops, press ESC three times. Inputting the end code 1. Select with and press . 2. Select the end code type with and press . "111" is selected in the example. Press and the work clamp returns to the first stitch(point A). 3. Press . ESC The work clamp returns to the home position. Programmer 35
Programmer
35
Chapter 2 Programming with Help Function
7.
Move the work clamp with
. Press
twice when the needle point is at point B
of the pattern.
8.
Program points C, D and E.
9.
When point E is programmed, press
again.
10.
Program point F.
11. When point F is programmed, press
again.
12.
Press
.
The needle moves to points F, G and H.
13. When the needle stops, press
�
ESC
ESC
three
times.
2
Inputting the end code
1.
Select
with
and press
.
2.
Select the end code type with
and
press
.
"111" is selected in the example. Press
and the work clamp
returns to the first stitch(point A).
3.
Press
�
ESC
ESC
.
The work clamp returns to the home position.