Brother International BAS-375E Programmer Instruction Manual - English - Page 149
Saving, Ending program, Adding sewing point before the first stitch, Calling data, Moving
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Chapter 3 Programming with Command Function 4. The needle point moves to 1'. Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press P . Adding sewing point before the first stitch A point is added before the current sewing point to change the sewing start position. The example in the left is used for explanation of changing the sewing start position from 1 to 1'. Calling data 1. Specify the program number on the operation panel and press the read/write switch to read the data. Moving to position 1. 1. Press 1 and press . The work clamp moves to the start position. 148 Programmer
Programmer
148
Chapter 3 Programming with Command Function
4.
The needle point moves to 1'.
5
Saving
1.
Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
6
Ending program
1.
Press
P
.
Adding sewing point before the first stitch
A point is added before the current sewing point to
change the sewing start position.
The example in the left is used for explanation of
changing the sewing start position from 1 to 1'.
1
Calling data
1.
Specify the program number on the
operation panel and press the read/write
switch to read the data.
2
Moving to position 1.
1.
Press
1
and press
.
The work clamp moves to the start position.