Brother International BAS-375E Programmer Instruction Manual - English - Page 133
when the needle point is at point C of the, Specify the program number on
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Chapter 3 Programming with Command Function 3. Program pattern 1. 4. Input point B and press F . 5. Move the work clamp with . Press L when the needle point is at point C of the pattern. 6. Program pattern 2. Inputting the end code 1. Press L at the last stitch and press . 1 1 1 E The work clamp returns to the start position. Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press P . Pattern 1 Pattern 2 132 Programmer
Programmer
132
Chapter 3 Programming with Command Function
3.
Program pattern 1.
4.
Input point B and press
F
.
5.
Move the work clamp with
. Press
L
when the needle point is at point C of the
pattern.
6.
Program pattern 2.
2
Inputting the end code
1.
Press
L
at the last stitch and press
E
1
1
1
.
The work clamp returns to the start position.
3
Saving
1.
Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
4
Ending program
1.
Press
P
.
Pattern 1
Pattern 2