Brother International BAS-375E Programmer Instruction Manual - English - Page 156
Moving in parallel, Saving, Ending program, Moving the pattern in parallel 2, Calling data, Moving
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Moving in parallel 1. Move the work clamp with . Press L when the needle point is at A of the pattern. Chaprter 3 Programming with Command Function Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press P . Moving the pattern in parallel 2 The program data is moved in parallel. The example in the left is used for explanation of moving the pattern in parallel when the first stitch is the escape point. Calling data 1. Specify the program number on the operation panel and press the read/write switch to read the data. Moving 1. Press 2 and press . The needle point moves to point A. Programmer 155
Chaprter 3 Programming with Command Function
Programmer
155
2
Moving in parallel
1.
Move the work clamp with
. Press
L
when the needle point is at A of the
pattern.
3
Saving
1.
Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
4
Ending program
1.
Press
P
.
Moving the pattern in parallel 2
The program data is moved in parallel. The example
in the left is used for explanation of moving the
pattern in parallel when the first stitch is the escape
point.
1
Calling data
1.
Specify the program number on the
operation panel and press the read/write
switch to read the data.
2
Moving
1.
Press
2
and press
.
The needle point moves to point A.