Brother International BAS-375E Programmer Instruction Manual - English - Page 137
Splitting, Programming, Inputting the end code, Saving, Program patterns 2 and 3.
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Chapter 3 Programming with Command Function Splitting Pattern 1 Different patterns, splitting each pattern in sequence, are programmed. The example in the left is used for explanation of 3 patterns in sequence. Pattern 2 Programming 1. Press P . The work clamp moves to the home position and the programmer screen is displayed. 2. Move the work clamp with . Press L when the needle point is at point A of the pattern. The first stitch (point A) is programmed. 3. Program pattern 1. 4. Input point B and press F . 5. Move the work clamp with . Press 6 6 6 L when the needle point is at point C of the pattern. To change the pattern, press the pressure holder lift switch and replace the pattern. 6. Program patterns 2 and 3. Inputting the end code 1. Press L at the last stitch and press . 1 1 1 E The work clamp returns to the start position. Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. 136 Programmer Pattern 1 Pattern 2