Brother International BAS-375E Programmer Instruction Manual - English - Page 94
Creating basting data, Specify breakpoints for sewing a series of different patterns.
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Creating basting data Create basting data. 1. Select and press . Chapter 2 Programming with Help Function 2. Move the needle with , then press . Remaining plot count Distance from the previous point in the direction of X or Y axis Creating split data Specify breakpoints for sewing a series of different patterns. 1. Select and press . 2. Use to specify whether to stop the needle at the lower end or not, then press . ON: The needle stops at the lower end. Thread breakage is not carried on. OFF: The needle stops at the upper end. Thread breakage is carried on. Programmer 93
Programmer
93
Chapter 2 Programming with Help Function
Creating basting data
Create basting data.
1.
Select
and press
.
2.
Move the needle with
, then press
.
Creating split data
Specify breakpoints for sewing a series of different patterns.
1.
Select
and press
.
2.
Use
to specify whether to stop the needle at the lower end or not,
then press
.
Remaining plot count
Distance from the previous point in the
direction of X or Y axis
ON:
The needle stops at the lower end.
Thread breakage is not carried on.
OFF:The needle stops at the upper end.
Thread breakage is carried on.