Brother International BAS-375E Programmer Instruction Manual - English - Page 197
Setting the extended option output
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Chapter 4 Extended Option Output Setting the extended option output Items to be set are as follows: Extended option output number Operation setting Output condition Timer 1 Timer 2 Specify a number out of 1 - 16. Refer to "Table of extended option output" (Refer to page 205 .) Select one out of ON, OFF, FLIP and FLOP with . Input conditions for the extended option output. 3 conditions can be specified. Refer to "Table of extended option output" (Refer to page 205 .) Set the time until the output varies after the output condition is established. Input the value in unit of 10 ms. Value of 0 or 10 - 2550 ms is set. Set the time for implementation of the extended option output. Input the value in unit of 10 ms. Value of 0 or 10 - 2550 ms is set. When the value is 0, the output remains varying. When setting is complete, be sure to press . Extended option output No. Operation setting Output condition Timer 1 Timer 2 To cancel the set value, input 0 0 0 and press P . To register the setting into the machine, carry out operation of "Writing the extended option output data" (page 199). 196 Programmer