Brother International BAS-375E Programmer Instruction Manual - English - Page 174
Creating double stitch, If sharp angles or fine curves are included in the pattern sheet
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Chapter 3 Programming with Command Function Creating double stitch Command to be used 2 M M 789L 788L 11 E Creating double stitch in the reverse direction to the sewing path. Input the width of double stitch in . Values 1.0 - 9.9 mm are available for the width. Example Width 1.5 mm Input 215 Input the stitch length in . Carrying out double stitch on the left side to the sewing path. Carrying out double stitch on the right side to the sewing path. Starting double stitch calculations. (This is the end code. Refer to page 179 for details.) If sharp angles or fine curves are included in the pattern sheet, the desired double stitch may not be achieved. 1. Select the sewing start position with and press L . 2. Determine the width and input 2 M. 3. Move the needle with to select the second point, then press L . 4. Move the needle to the corner point and input 7 8 L . Programmer 173