Brother International HL-2170W Quick Setup Guide - English - Page 10

Getting Started Printer LED Indications 3 : Blinking Printer LED Toner Drum Error : ON OFF Sleep : OFF Warming up Cooling down 1 Ready Receiving data 2 Print Data remaining 2 Ready (Blue) Dimmed Printer LED Toner low 3 Toner (Yellow) Drum (Yellow) Error (Red) Toner life end Drum near Cover open end of life 3 Paper jam 2 No paper Drum Error 2 Service call 2 Ready (Blue) Chapter 5 User's Guide Chapter 5 Chapter 5 Chapter 6 Chapter 6 1 The LED will blink in a pattern of ON for 1 second and then OFF for 1 second. 2 The LED will blink in a pattern of ON for 0.5 seconds and then OFF for 0.5 seconds. 3 The yellow LED will blink in a pattern of ON for 2 seconds and then OFF for 3 seconds. Chapter 4 Chapter 4 LED indications when using the one-push wireless setting mode Printer LED Toner (Yellow) Drum (Yellow) Error (Red) Searching or accessing the access point 1 Connecting and downloading settings from the access point 1 Connection succeeded 2 Connection failed 3 Ready (Blue) 1 The LED will blink (turn on for 0.2 seconds and off for 0.1 second). 2 The LED will turn on for 5 minutes. 3 The LED will blink (turn on for 0.1 second and off for 0.1 second) for 30 seconds. 4 The LED will flash 10 times and then turn OFF for half a second. This pattern will repeat 20 times. Session overlap is detected 4 8