Brother International HL-2170W Quick Setup Guide - English - Page 14
Printing a test - test page
UPC - 012502619468
View all Brother International HL-2170W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Setting Up the Machine 3 Printing a test page Improper Setup DO NOT connect the interface cable yet. 4 After the printer has finished warming up, the Ready LED / Go button (1) stops blinking and stays blue. 1 Make sure that the printer power switch is off. Connect the AC power cord to the printer. 1 5 Press the Go button. The printer prints a test page. Check that the test page has printed correctly. 2 Plug the AC power cord into an AC power outlet. Turn on the printer power switch. 3 Unfold support flap 1. Note This function will not be available after the first print job you send from your computer. 12
Setting Up the Machine
12
3
Printing a test page
Improper Setup
DO NOT connect the interface cable yet.
1
Make sure that the printer power switch is off.
Connect the AC power cord to the printer.
2
Plug the AC power cord into an AC power
outlet. Turn on the printer power switch.
3
Unfold support flap 1.
4
After the printer has finished warming up, the
Ready
LED
/
Go
button (1) stops blinking and
stays blue.
5
Press the
Go
button. The printer prints a test
page. Check that the test page has printed
correctly.
Note
This function will not be available after the first
print job you send from your computer.
1