Brother International HL-2170W Quick Setup Guide - English - Page 40
Advanced, Authentication Method, Open System, Encryption Mode, Network key, Change IP Address - wireless setup mac
UPC - 012502619468
View all Brother International HL-2170W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
STEP 2 Installing the Printer Driver Macintosh® 13 If your network is configured for Authentication and Encryption, the following screen will appear. When configuring your Brother wireless printer, you must ensure that it is configured to match the Authentication and Encryption settings of your existing wireless network. Choose the Authentication Method and Encryption Mode from the pull-downs in each setting box. Then enter the Network key and Confirm Network Key, and then click Next. 14 Click Next. The settings will be sent to your printer. The settings will remain unchanged if you click Cancel. Note • If you want to setup more than WEP key1, click Advanced. • If you do not know the Authentication or Encryption settings for your network, contact your network administrator. • If the Authentication Method is set to Open System and the Encryption Mode is set to WEP, an error indication will NOT appear if the Network key is incorrect. Note If you want to manually enter the IP address settings of your printer, click Change IP Address and enter the necessary IP address settings for your network. 15 Disconnect the network cable between your access point (hub or router) and the printer, and click Next. Installing the printer driver Improper Setup • DO NOT try to cancel any of the screens during this installation. • If your wireless settings fail, an error message will appear during the installation of the printer driver and the installation will be terminated. If you encounter this failure, please go back to step 4 and setup the wireless connection again. 16 The driver installation starts. Follow the on-screen instructions. Then, restart your Macintosh®. For Mac OS® X 10.2.4 to 10.2.8 users: Go to step 19. For Mac OS® X 10.3 or greater users: Go to step 17. Macintosh® Wireless Network 38