Brother International Innov-ís 80 Users Manual - English - Page 102
position the fabric so that the needle drops 2
View all Brother International Innov-ís 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Select stitch 52 . c • For details, refer to "Selecting stitching" (page 67). Attach buttonhole foot "A". d • For details, refer to "Replacing the presser foot" (page 41). Pass the upper thread down through the hole e in the presser foot, and then pull it under the presser foot, as shown. Pull down the buttonhole lever as far as g possible. a a Buttonhole lever The buttonhole lever is positioned behind the bracket on the buttonhole foot. 1 3 With the opening of the pocket toward you, f position the fabric so that the needle drops 2 mm (1/16 inch) in front of the pocket opening, and then lower the presser foot lever. 2 a Buttonhole lever b Bracket Gently hold the end of the upper thread in h your left hand, and then start sewing. a a 2 mm (1/16 inch) Note z When lowering the presser foot, do not push in the front of the presser foot, otherwise the bar tack will not be sewn with the correct size. X Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. Cut the threads, raise the presser foot lever, i and then remove the fabric. Raise the buttonhole lever to its original j position. Memo z If the fabric does not feed, for example, because it is too thick, increase the stitch length. For details, refer to "Adjusting the stitch length" (page 59). Reinforcement Stitching 101