Brother International Innov-ís 80 Users Manual - English - Page 70
reverse/reinforcement stitching and adjust
View all Brother International Innov-ís 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Use the numeric keys to type in the two-digit b number for the desired stitch. For stitches 01 through 09, the stitch can also be selected by using the numeric keys to type in a one-digit number, then pressing (OK key). ■ To select a different stitch Check the icon in the lower-left corner of the screen for the current mode. X After the entered number appears in the center of the screen, the stitch is selected. Example The current mode is indicated. To select a stitch in the same mode as the current one • In the utility stitch mode, simply type in the number for the desired stitch. • For the numbers of the various stitches, refer to the stitch pattern plate and "Stitch Settings" (page 120). • If the first number (tens when entering twodigit numbers, ones when entering one-digit numbers) was incorrectly entered, press (Cancel/clear key) to erase the entered number. • If an incorrect two-digit number was entered, an error beep is sounded, and the entered number is cleared. • In the decorative stitch mode and character stitch mode, press (Cancel/clear key) to 3 cancel the stitch, and then type in the number for the desired stitch. • However, if the currently selected stitch was sewn at least one time, typing in a stitch number switches to the new stitch, even if the previous stitch was not canceled. Memo z Patterns can be combined by selecting a different decorative stitch while a stitch is selected. For details, refer to "Saving patterns" (page 114). If necessary, specify the setting for automatic f reverse/reinforcement stitching and adjust the stitch length, etc. • For details on sewing with each of the utility stitches, begin on page 71. Note z When a stitch is selected, the icon for the presser foot that should be used appears in the screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again. Memo z For details on adjusting the stitch width and length, refer to "Adjusting the Stitch Width and Length" (page 58). Selecting Stitching 69