Brother International Innov-ís 80 Users Manual - English - Page 35
When using the twin needle, be sure to, attach zigzag foot J, otherwise the, needle may break or
View all Brother International Innov-ís 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
GETTING READY Insert the extra spool pin into the end of the d bobbin winder shaft. a Bobbin winder shaft b Extra spool pin c Thread spool Without passing the thread through the needle g bar thread guide, manually thread the right needle. Pass the thread through the eye of the needle from the front. Install the thread spool and thread the upper e thread. Memo z When setting the thread spool, set it so that the thread winds off from the front of the spool. Thread the upper thread for the right side in f the same way that the upper thread for the left side was threaded. Attach zigzag foot "J". h • For details on changing the presser foot, refer to "Replacing the presser foot" (page 41). CAUTION ● When using the twin needle, be sure to attach zigzag foot "J", otherwise the needle may break or the machine may be damaged. Turn on the sewing machine. i 1 X The LCD comes on. a Thread guide cover • For details, refer to step h through j of "Threading the upper thread" (page 28). 34