Brother International Innov-ís 80 Users Manual - English - Page 103

UTILITY STITCHES Eyelet Stitching Eyelets, such as those on belts, can be sewn. Three sizes of eyelets are possible: 7 mm, 6 mm and 5 mm (1/4, 15/64 and 3/16 inch). Pattern Stitch Name Application 54 Eyelet stitch Sewing eyelets, for example, on belts Stitch Width [mm (inch)] Auto Manual 7.0, 6.0 or 7.0 5.0 (1/4) (1/4, 15/64 or 3/16) Stitch Length [mm (inch)] Auto Manual - - Presser Foot N Turn on the sewing machine. a Select stitch 54 . b • For details, refer to "Selecting stitching" (page 67). Attach monogramming foot "N". c Start sewing. f X Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. Use the eyelet punch to cut a hole in the g center of the eyelet. • For details, refer to "Replacing the presser foot" (page 41). Adjust either the stitch width or the stitch d length to select the desired eyelet size. a b c a 7 mm (1/4 inch) b 6 mm (15/64 inch) c 5 mm (3/16 inch) • For details, refer to "Adjusting the stitch width" (page 58). Lower the needle into the fabric at the e beginning of the stitching, and then lower the presser foot lever. • When using the eyelet punch, place thick paper or some other protective sheet under the fabric before punching the hole in the fabric. Memo z If light weight thread is used, the stitching may be sparse. If this occurs, sew the eyelet twice before removing the fabric, one on top of the other. 102