Brother International Innov-ís 80 Users Manual - English - Page 29
Upper Threading
View all Brother International Innov-ís 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
GETTING READY Upper Threading In this section, the procedures for positioning the spool for the upper thread and threading the needle are described. a Spool pin b Mark on handwheel CAUTION ● When threading the upper thread, carefully follow the instructions. If the upper threading is not correct, the thread may become tangled and the needle may bend or break. ● The needle threader can be used with sewing machine needles 75/11 through 100/16. ● Use appropriate thread and needle combinations. For details on appropriate needle and thread combinations, refer to "Needle types and their uses" (page 38). ● Thread with a thickness of 130/20 or thicker cannot be used with the needle threader. ● The needle threader cannot be used with the wing needle or the twin needle. ● If the needle threader cannot be used, refer to "Threading the needle manually (without using the needle threader)" (page 33). Memo z The order that the machine should be threaded is indicated by a solid line on the sewing machine. Be sure to thread the machine as indicated. 28 Threading the upper thread Set the spool of thread on the spool pin, and then thread the machine. Turn on the sewing machine. a Raise the presser foot lever. b a a Presser foot lever CAUTION ● If the presser foot is not raised, the sewing machine cannot be threaded.