Brother International Innov-ís 80 Users Manual - English - Page 132
sewn correctly.
View all Brother International Innov-ís 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Symptom Probable Cause Remedy Reference Dust has accumulated in the feed dogs or in the bobbin case. Clean the race. page 126 A high-pitched noise is made while sewing. The upper thread was not threaded correctly. The bobbin case is scratched, or has a burr on it. Correct the upper threading. Replace the bobbin case. Contact your dealer or the nearest authorized service center. page 28 - A bobbin designed specifically for this machine is not used. Incorrect bobbins will not work properly. Only use a bobbin designed specifically for this machine. page 22 The needle threader cannot be used. The needle has not been raised to the correct position. The needle is incorrectly installed. Press the needle position button. Correctly install the needle. page 31 page 39 The presser foot that is used is not Attach the presser foot that is appropriate for the type of stitch that appropriate for the type of stitch page 120 you wish to sew. that you wish to sew. The stitch is not sewn correctly. The thread tension is incorrect. Adjust the tension of the upper thread. page 57 4 The thread is tangled, for example, in the bobbin case. Remove the tangle thread. If the thread is tangled in the bobbin case, clean the race. page 126 The feed dogs are lowered. Slide the drop feed lever to the right. (as seen from the rear of the machine) page 97 The fabric does not feed. The stitch is too short. The presser foot that is used is not appropriate for the type of stitch that you wish to sew. Lengthen the stitch length. Attach the presser foot that is appropriate for the type of stitch that you wish to sew. page 59 page 120 The thread is tangled, for example, in the bobbin case. Remove the tangle thread. If the thread is tangled in the bobbin case, clean the race. page 126 The sewing lamp does not come on. The sewing lamp is damaged. Contact your dealer or the nearest authorized service center. - Nothing appears in The brightness of the LCD is either the LCD. too light or too dark. Adjust the brightness of the LCD. page 134 Troubleshooting 131