Brother International Innov-ís 80 Users Manual - English - Page 74
Sewing overcasting stitches using the optional side cutter
View all Brother International Innov-ís 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Sewing overcasting stitches using the optional side cutter Using the side cutter, seam allowances can be finished while the edge of the fabric is cut off. Four stitches can be used to sew overcasting stitches with the side cutter. Pattern Stitch Name Application Stitch Width [mm (inch)] Auto Manual Stitch Length [mm (inch)] Auto Manual Presser Foot 01 Sewing straight stitches while 0.0 0.0-2.5 2.5 0.2-5.0 cutting the fabric (0) (0-3/32) (3/32) (1/64-3/16) 08 Overcasting stitch Preventing fraying in thin and medium weight fabrics while cutting the fabric 3.5 3.5-5.0 2.0 1.0-4.0 (1/8) (1/8-3/16) (1/16) (1/16-3/16) S 09 Preventing fraying in thick 5.0 3.5-5.0 2.5 1.0-4.0 fabrics while cutting the fabric (3/16) (1/8-3/16) (3/32) (1/16-3/16) 3 21 Sewing zigzag stitches while 3.5 0.0-7.0 1.4 0.0-4.0 cutting the fabric (1/8) (0-1/4) (1/16) (0-3/16) When using the side cutter, adjust the stitch width setting to a value within the range indicated in the table above. Hook the connecting fork of the side cutter d onto the needle clamp screw. Remove the presser foot. a • For details, refer to "Replacing the presser foot" (page 41). Lower the presser foot lever, and then b manually thread the needle. • The needle threader cannot be used. If the needle threader is used with the side cutter, the sewing machine may be damaged. Raise the presser foot lever. c a Connecting fork b Needle clamp screw Position the side cutter so that side cutter pin e is aligned with the notch in the presser foot holder, and then slowly lower the presser foot lever. b a a Notch in presser foot holder b Pin X The side cutter is attached. Overcasting Stitches 73