Brother International Innov-ís 80 Users Manual - English - Page 63
Useful Sewing Tips
View all Brother International Innov-ís 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
SEWING BASICS Useful Sewing Tips Various ways to achieve better results for your sewing projects are described below. Refer to these tips when sewing your project. Trial sewing After a stitch is selected, the machine automatically sets the stitch width and length for the stitch that was selected. However, a trial piece of fabric should be sewn since, depending on the type of fabric and stitching being sewn, the desired results may not be achieved. For the trial sewing, use a piece of fabric and thread that are the same as those used for your project, and check the thread tension and stitch length and width. Since the results differ depending on the type of stitching and the number of layers of fabric sewn, perform the trial sewing under the same conditions that will be used with your project. Changing the sewing direction When the stitching reaches a corner, stop the a sewing machine. Leave the needle lowered (in the fabric). If the needle remained up when the machine stopped sewing, press (needle position button) to lower the needle. Raise the presser foot lever, and then turn the b fabric. Turn the fabric using the needle as a pivot. Sewing curves Stop sewing, and then slightly change the sewing direction to sew around the curve. For details on sewing with an even seam allowance, refer to "Sewing an even seam allowance" (page 64). When sewing along a curve while using a zigzag stitch, select a shorter stitch length in order to obtain a finer stitch. Sewing thick fabrics ■ If the fabric does not fit under the presser foot If the fabric does not fit easily under the presser foot, raise the presser foot lever even higher to bring the presser foot to its highest position. Lower the presser foot lever and continue c sewing. 62