Brother International Innov-ís 80 Users Manual - English - Page 45

GETTING READY Using the optional walking foot With the optional walking foot, both pieces of fabric are fed evenly by the feed dogs and the teeth on the presser foot. This is useful when sewing fabrics that are hard to feed such as vinyl and leather and when sewing fabrics that easily slip such as velvets or when quilting. Use the screwdriver to attach the walking foot. CAUTION ● Be sure to securely tighten the screw with the screwdriver, otherwise the needle may touch the presser foot, causing it to bend or break. ● Before starting to sew, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. ■ Attaching the walking foot Remove the presser foot holder. a • For details, refer to "Removing the presser foot holder" (page 43). Hook the connecting fork of the walking foot b onto the needle clamp screw. a Note z When sewing with the walking foot, sew at a speed between slow and medium. ■ Removing the walking foot Press (needle position button) once or a twice to raise the needle. b a Connecting fork b Needle clamp screw Lower the presser foot lever, insert the presser c foot holder screw, and then tighten the screw with the screwdriver. a Needle position button X The needle is raised. Turn off the sewing machine. b Raise the presser foot lever. a c a Presser foot holder screw a a Presser foot lever X The presser foot is raised. 44