Brother International Innov-ís 80 Users Manual - English - Page 43
Buttonhole foot
View all Brother International Innov-ís 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
GETTING READY Press the black button at the back of the d presser foot holder. a Raise the presser foot lever to check that the g presser foot is securely attached. b a Black button b Presser foot holder X The presser foot holder releases the presser foot. Place a different presser foot below the holder e so that the presser foot pin is aligned with the notch in the holder. Position the presser foot so the letter indicating the presser foot type (A, G, I, J, M, N or R) is positioned to be read. a b c a Presser foot holder b Notch c Pin Slowly lower the presser foot lever so that the f presser foot pin snaps into the notch in the presser foot holder. a Presser foot lever b Presser foot holder c Notch d Pin a b Note z When a stitch is selected, the icon for the presser foot that should be used appears in the screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again. Buttonhole foot "A" Overcasting foot "G" Zigzag foot "J" Button fitting foot "M" Monogramming foot "N" Blind stitch foot "R" z For details on the presser foot that should be used with the selected stitch, refer to "Stitch Settings" (page 120). c d a Presser foot lever X The presser foot is attached. 42