Brother International MFC 845CW Users Manual - English - Page 153
Black Start, Color Start, Error Message, Cause, Action, Low Temperature, Media Error, Near Empty - cartridges
UPC - 012502615828
View all Brother International MFC 845CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Troubleshooting and Routine Maintenance Error Message Low Temperature Media Error Near Empty No Caller ID No Cartridge No File No Paper Fed No Response/Busy Not Registered Cause Action The print head is too cold. Allow the machine to warm up. The media card is either corrupted, improperly formatted, or there is a problem with the media card. Put the card firmly into the slot again to make sure it is in the correct position. If the error remains, check the media drive by putting in another media card that you know is working. One or more of the ink cartridges are running out of ink. If a sending machine has a color fax, the machine's 'handshake' will ask that the fax be sent as black and white. If the sending machine has the ability to convert it, the color fax will be received into memory as a black and white fax. Order a new ink cartridge. (See Ordering accessories and supplies on page iii.) There is no incoming call history. You did not receive calls or you have not subscribed to the Caller ID service from your telephone company. If you want to use the Caller ID feature call your telephone company. (See Caller ID on page 56.) An ink cartridge is not installed properly. Reinstall the ink cartridge. (See Replacing the ink cartridges on page 143.) The media card in the media drive Put the correct media card into the slot does not contain a .JPG file. again. The machine is out of paper or paper is not properly loaded in the paper tray. Do one of the following: Refill the paper in the paper tray, and then press Black Start or Color Start. Remove the paper and load it again and then press Black Start or Color Start. The paper is jammed in the machine. See Printer jam or paper jam on page 141. The number you dialed does not Verify the number and try again. answer or is busy. You tried to access a Speed Dial Set up the Speed Dial number. (See number that is not programmed. Storing Speed-Dial numbers on page 66.) 137