Brother International MFC 845CW Users Manual - English - Page 74
Connections
UPC - 012502615828
View all Brother International MFC 845CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 7 • If You Do Not Subscribe to Distinctive Ring Service: You must plug your TAD into the EXT. jack of your machine. If your TAD is plugged into a wall jack, both your machine and the TAD will try to control the phone line. (See the illustration below.) 1 1 1 TAD When the TAD answers a call, the LCD shows Telephone (MFC-440CN) or Ext. Tel in Use (MFC-665CW and MFC-845CW). Connections 7 The external TAD must be plugged into the jack labeled EXT. Your machine cannot work properly if you plug the TAD into a wall jack (unless you are using Distinctive Ring). a Plug the telephone line cord from the telephone wall jack into the jack labeled LINE. b Plug the telephone line cord from the external TAD into the jack labeled EXT. (Make sure this cord is connected to the TAD at the TAD's telephone line jack, and not its handset jack.) c Set your external TAD to four rings or less. (The machine's Ring Delay setting does not apply.) d Record the outgoing message on your external TAD. e Set the TAD to answer calls. f Do one of the following: (For MFC-440CN) Set the Receive Mode to External TAD. (For MFC-665CW and MFC-845CW) Set the Receive Mode to Manual with Easy Receive turned on. (See Choosing the Receive Mode on page 46.) 58