Brother International MFC-P2000 Service Manual - Page 162

 Note If the machine does not operate as you expect it to, it is recommended that you turn off the power switch, wait a few seconds and then turn it on again. If you still have problems, consult your dealer or our authorized service representative. Operator Calls for Copying and Scanning Functions If a recoverable error occurs, the machine shows "E" on the display. To clear the error, press the Stop Button. When there is no document in the feeder, inserting a document in the document feeder clears the error. Errors occur when the following happens; * When the document causes a paper jam in the document feeder while the mahine is feeding the document. * When the machine is busy. (When the machine is being used as a scanner.) * When there is no paper in the sheet feeder. *When memory full happens. (The mahine will prints out an error message.) Service Calls for the Printing Function If an unrecoverable error occurs, the machine indicates the need for a service call by lighting all the lamps and then the following combination of lamps alternately: Service Call Drum Alarm Ready Data Fuser malfunction q r r r Laser BD malfunction r q r r Scanner malfunction q q r r ROM error r r q r D-RAM error q r q r Service Call Drum Alarm Ready Data Service A r q q r Service B q q q r Service C r r r q Service D q r r q Service E0 r q r q Service Call Drum Alarm Ready Data Service E1 q q r q Service P r r q q NV-RAM error q r q q CPU runtime error q q q q r OFF q ON - 33 -