Brother International MFC-P2000 Service Manual - Page 165

MACHINE SPECIFICATIONS Printing Print Method Laser Resolution Print Quality Print Speed Warm-Up First Print Print Media Electrophotography by semiconductor laser beam scanning Wavelength: 780 nm / Output: 5 mW max. 600 dots/inch (under Brother Printing Solution for Windows
/ under Brother Software PCL5e for DOS box in Windows
) 300 dots/inch (under DOS operating system) Normal printing mode Economy printing mode (up to 25% and 50% toner saving) Up to 10 pages/minute (when loading A4 or letter-size paper from the multi-purpose sheet feeder) NOTE: Maximum print speed is obtained by printing several copies of the same page. Print speed may vary depending on interface type, emulation, processing power of the computer, memory allocated to the print job, paper size and graphic quality. Max. 30 seconds at 23°C (73.4°F) (The warm up time depends on the ambient temperature and humidity.) 15 seconds (when loading A4 or letter-size paper from the multi-purpose sheet feeder) Toner cartridge: Life Expectancy: 2,400 pages/new toner cartridge 1,000 pages/starter toner cartridge (when printing A4- or letter-size paper at 5% print coverage) NOTE: Toner life expectancy will vary depending on the type of average print job printed. Drum Unit: Life Expectancy: 20,000 pages at 20 pages per job 8,000 pages at 1 page per job NOTE: There are many factors that determine the actual drum life, such as temperature, humidity, type of paper and toner that you use, the number of pages per print job, etc.. - 36 -