Brother International MFC-P2000 Service Manual - Page 240
Wipe the surface of the photosensitive drum with, surface of the drum until you find the cause of
UPC - 012502525394
View all Brother International MFC-P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
USER'S GUIDE Question Black spots appears on the printed paper at 94mm intervals. Fig. 7-17 Black Spots Recommendation If toner remains stuck on the drum, wipe it off gently with a cotton swab. Replace the drum unit if the drum is scratched or deteriorated. Clean the drum unit as follows; 1. Place a printed page in front of the process unit, and find the exact position of the image defect. position of smudge o on the drum 94mm interval Fig. 7-18 2. Turn the drum gear by hand while looking at the surface of the drum until you find the cause of the problem. Fig. 7-19 3. Wipe the surface of the photosensitive drum with a cotton swab until the dust or paper on the surface of the drum comes off. Fig. 7-20 Do not wipe the surface of the photosensitive drum with something sharp. (ball-point pen etc.) Note The drum unit is a consumable, and it is necessary to replace it periodically. 7-18