Brother International MFC-P2000 Service Manual - Page 59
Test' in IV., Remove the main PCB ASSY.
UPC - 012502525394
View all Brother International MFC-P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Caution: Do not open the enclosure of the laser unit. Never touch the inside of the laser unit or the mirror when disassembling or reassembling. If there is any dirt or dust on the mirror, blow it off. Taptite, cup M3x8 Toner Sensor PCB Fig. 3-25 Laser Unit 3.10 Main PCB ASSY (1) Remove the three M4x6 screws. (2) Hold the hooks at the left and right of the mounting frame to pull out the main PCB ASSY slightly, and disconnect the three harnesses (R motor, sensor and CIS harnesses). (3) Remove the main PCB ASSY. Sensor Harness Main PCB ASSY Screw, pan M4x6 R Motor Harness Hook CIS Harness Screw, pan M4x6 Fig. 3-28 Hook Caution: When replacing the main PCB, be sure to implement the maintenance copy test. For detailed operation of the test, see '9. Scanner Inspection Mode - A-3 Maintenance Copy Test' in Chapter IV. III-18