Brother International MFC-P2000 Service Manual - Page 56
Never touch the surface of the halogen heater lamp and the heat roller., Caution
UPC - 012502525394
View all Brother International MFC-P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
PR98292 (3) Remove the two M3x12 tapping screws. (4) Open the fixing unit cover along the open side of the fixing unit cover. Fixing unit cover Taptite, bind M3x12 Fixing unit vr Pressure roller Shaft Fixing unit frame Fig. 3-21 (5) Release the right side of the paper eject roller shaft. (6) Remove the four eject pinch rollers and the pinch springs from the fixing unit frame. Then, remove the pinch spring from each pinch roller. Paper eject roller shaft Pinch Spring Eject Pinch Roller Fig. 3-21a (7) Remove the M3x10 self tapping screw securing the connector plate. (8) Remove the connector plate from the fixing unit frame and loosen the other M3x10 tapping screw securing the fixing unit cover. (9) Remove the idle gear 16 from the fixing unit frame. (10) Remove the heat roller gear, retaining ring, heat roller washer and heat roller bearing. Then, remove the halogen heater lamp from the heat roller. Caution : Never touch the surface of the halogen heater lamp and the heat roller. III-15