Canon BJC 6000 Service Manual - Page 129
Head Gap Adjustment 1, 2.4 Head gap adjustment
View all Canon BJC 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
BJC-6000 Part 5: Maintenance 5.2.4 Head gap adjustment Preparation: 1) Reassemble to the level the top cover is to be put on next. 2) Raise both the right and left adjustable bearings supporting the carriage shaft in the direction of arrow 1, and temporarily fix the bearings in that position using the fixing screws (red). 3) Remove the right and left shaft clips from the carriage shaft. 4) Set the paper thickness selector to the lowest position (thick paper position). Ensure that the gap gauge is clean and not deformed. Also ensure that CAUTION the platen is clean. Adjustable Bearing Supporting the Carriage Shaft (right) 1 Carriage Belt Adjustable Bearing Supporting the Carriage Shaft (left) Fixing Screw (red) Fixing Screw (painted red) Shaft Clip Black BJ Cartridge Paper Thickness Lever Normal Paper Position Thick Paper Position Figure 5-9 Head Gap Adjustment (1) 5-11