Canon EOS C200B EOS C200 EOS C200B Instruction Manual - Page 105
Colors Bars/Audio Reference Signal, Color Bars, Audio Reference Signal
View all Canon EOS C200B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Colors Bars/Audio Reference Signal Colors Bars/Audio Reference Signal You can have the camera generate color bars and a 1 kHz audio reference signal and output them from the VIDEO terminal, viewfinder1, SDI terminal, HDMI OUT terminal and × (headphone) terminal2. 1 k only. 2 Audio reference signal only. Operating modes: 105 Color Bars The camera offers 3 types of color bars. 1 Open the [Color Bars] submenu to activate the color bars. > [v & Camera Setup] > [Color Bars] 2 Select [On] and then press the joystick. • The selected color bars appear on the screen. • Turning off the camera or changing the operating mode to 3 Open the [Color Bar Type] submenu. > [v & Camera Setup] > [Color Bar Type] 4 Select the type of color bars and then press the joystick. mode will deactivate the color bars. NOTES • If you set an assignable button to [Color Bars] (A 125), you can press the button to turn the color bars on/off. • You cannot change the type of color bars while recording or while pre-recording mode is activated. • While color bars are displayed, peaking, magnification and waveform monitor are not available. Audio Reference Signal The camera can output a 1 kHz audio reference signal with the color bars. 1 Open the [1 kHz Tone] submenu. > [¡ $ Audio Setup] > [1 kHz Tone] 2 Select the desired level and then press the joystick. • Available levels are -12 dB, -18 dB and -20 dB. • Select [Off] to turn off the signal. • The signal is output at the selected level.