Canon EOS C200B EOS C200 EOS C200B Instruction Manual - Page 132
Embedding Custom Picture Settings in a Clip, Replacing a File in the Camera with a File on SD Card B
View all Canon EOS C200B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Custom Picture Settings 132 3 Select the destination file and then press the joystick. • Select an existing custom picture file to overwrite it or, if this option is available, select [New File] to save the settings as a new custom picture file on SD card B. 4 Select [OK] and then press the joystick. • The file on SD card B will be overwritten or a new file will be created on the SD card. 5 When the confirmation message appears, press the joystick. Replacing a File in the Camera with a File on SD Card B 1 Select the custom picture file that you wish to replace (A 129). 2 Open the [Load from SD Card B] submenu. > [ ! Custom Picture/HDR] > [File] > [Load from SD Card B] 3 Select the file with the settings that you want to replicate and then press the joystick. 4 Select [OK] and then press the joystick. • The file in the camera will be overwritten by the one on SD card B. 5 When the confirmation message appears, press the joystick. Embedding Custom Picture Settings in a Clip When you record a clip using custom picture settings, you can have the custom picture file embedded in the metadata and saved along with the clip. Operating modes: 1 Open the [Add / File] submenu. > [3 $ Recording/Media Setup] > [Metadata] > [Add / File] 2 Select [On] and then press the joystick. • Select [Off] to not embed custom picture settings in a clip.