Canon EOS C200B EOS C200 EOS C200B Instruction Manual - Page 167

Manual Setup, Select the Wi-Fi network's authentication method and then press the joystick.

Get Canon EOS C200B PDF manuals and user guides View all Canon EOS C200B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 167 highlights

Connecting to a Wi-Fi Network Manual Setup If you prefer, you can enter manually the details of the Wi-Fi network you want to connect to. Follow the instructions on the screen to complete the procedure. 1 To enter the [SSID] (network name), select [Input] and then press the joystick. • Enter the SSID (network name) of the selected Wi-Fi network using the keyboard screen (A 35). • The network name is needed to connect the network device to the camera. If necessary, write it down. • After entering the network name, select [OK] and then press the joystick. 2 Select the Wi-Fi network's authentication method and then press the joystick. • If you selected [Shared Key], skip to step 4. 3 Select the Wi-Fi network's encryption method and then press the joystick. • If the authentication method is [Open], you can select [WEP] and continue to step 4, or [No Encryption] and skip to step 6. • If the authentication method is [WPA-PSK] or [WPA2-PSK], you can select [TKIP] or [AES]. 4 If necessary, select the WEP index key. 5 To enter the [Encryption Key] (password), select [Input] and then press the joystick. • Enter the password of the selected Wi-Fi network using the keyboard screen (A 35). 6 Continue with the procedure to configure the IP address assignment (A 163). 167 NOTES Valid passwords vary depending on the encryption method. 64-bit WEP encryption: 5 ASCII characters or 10 hexadecimal characters. 128-bit WEP encryption: 13 ASCII characters or 26 hexadecimal characters. AES / TKIP encryption: 8 to 63 ASCII characters or 64 hexadecimal characters. * Note: ASCII characters include the numbers 0 to 9, the letters a to z and A to Z and some punctuation marks and special symbols. Hexadecimal characters comprise the numbers 0 to 9 and the letters a to f and A to F.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
167
Connecting to a Wi-Fi Network
Manual Setup
If you prefer, you can enter manually the details of the Wi-Fi network you want to connect to. Follow the
instructions on the screen to complete the procedure.
1 To enter the [SSID] (network name), select [Input] and then press the joystick.
•
Enter the SSID (network name) of the selected Wi-Fi network using the keyboard screen (
A
35).
•
The network name is needed to connect the network device to the camera. If necessary, write it down.
•
After entering the network name, select [OK] and then press the joystick.
2 Select the Wi-Fi network’s authentication method and then press the joystick.
•
If you selected [Shared Key], skip to step 4.
3 Select the Wi-Fi network’s encryption method and then press the joystick.
•
If the authentication method is [Open], you can select [WEP] and continue to step 4, or [No Encryption] and
skip to step 6.
•
If the authentication method is [WPA-PSK] or [WPA2-PSK], you can select [TKIP] or [AES].
4 If necessary, select the WEP index key.
5 To enter the [Encryption Key] (password), select [Input] and then press the joystick.
•
Enter the password of the selected Wi-Fi network using the keyboard screen (
A
35).
6 Continue with the procedure to configure the IP address assignment (
A
163).
NOTES
Valid passwords vary depending on the encryption method.
64-bit WEP encryption:
5 ASCII characters or 10 hexadecimal characters.
128-bit WEP encryption:
13 ASCII characters or 26 hexadecimal characters.
AES / TKIP encryption:
8 to 63 ASCII characters or 64 hexadecimal characters.
*
Note: ASCII characters include the numbers 0 to 9, the letters a to z and A to Z and some punctuation marks and special
symbols. Hexadecimal characters comprise the numbers 0 to 9 and the letters a to f and A to F.