Canon EOS C200B EOS C200 EOS C200B Instruction Manual - Page 155

Connecting to an External Monitor or Recorder Outputting Simultaneously from the HDMI OUT Terminal and SDI Terminal The camera can output video signals simultaneously from the HDMI OUT terminal and SDI terminal. Perform this operation in the index screen while in MEDIA mode. Operating modes: 155 Enable SDI output. 1 Open the [SDI Output Always On] submenu. > [B " System Setup] > [SDI Output Always On] 2 Select [On (Linked to VIDEO Term.)] and then press the joystick. NOTES About output from the SDI terminal when SDI output is always on • The video output configuration is 1920x1080 60.00P (when 24.00 Hz) / 59.94P (when 59.94 Hz) / 50.00P (when 50.00 Hz) YCbCr 4:2:2 8bit. • Each assistance display is linked with the settings for the VIDEO terminal. • The audio signal, time code signal, and recording commands are not output. • Pressing the MIRROR button does not change the displayed image. When the display of the LCD monitor is inverted horizontally and vertically, the screen display is cleared. HDR Output When you record RAW clips, the camera can output high dynamic range (HDR) video compliant with the ITU-R BT.2100(HLG) or ITU-R BT.2100(PQ) standard from the SDI terminal or HDMI OUT terminal. The signal output will use narrow range coding. Operating modes: 1 Open the [HDR/LUT] screen. > [ ! Custom Picture/HDR] > [HDR/LUT] 2 Select [HDR: Off] and then press the joystick. 3 Push the joystick left/right to select [HDR: HLG] or [HDR: PQ] and then press the joystick. • Select [HDR: Off] to turn off HDR output.